Hi Guys today i am going to provide you an instruction on how to Flash Samsung Galaxy Y with Stock Firmware using ODIN with screenshot & video guide. So follow the instruction carefully and successfully Flash your Samsung Galaxy Y with ODIN.

  • A Samsung Galaxy y phone model gt-s5360.

  • A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer 

Installation Instruction:

  • Charge your phone battery min 80%
  • Download the required file Odin3 AND Stock and place  in a folder on your desktop.
  • Now extract both with any file extractor.


– (file which contains the stock rom i.e 2.3.6 )

  • Now turn off your Galaxy Y {Remove the battery for 5-10 seconds and insert it back}
  • Go to Download Mode by Pressing  Volume down + Home + Power for 5-10 sec to boot in Download Mode you can also see video below.
  • Now you entered in  Download mode select continue by pressing Volume up button.
  • Now attach/connect your phone to computer via USB cable.
  • Now on your computer open Odin3 v1.85.exe
  • After that extract Stock Rom file after unzipping you will get three files PDA_S5360_DXLF2.tar, MODEM_S5360_DXLF1.tar & CSC_S5360_OLBLG1.tar
  • Now in File[download] section of ODIN Browse the 3 tar files accordingly




  • PIT and BOOTLOADER files not required – leave it blank.
  • Leave all other fields and check boxes default as shown in picture below.

  • Now make sure you are getting yellow box in ID:COM (this means that your device is now connected and detected by odin)
  • Now clik on start.
  • And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully. Samsung Galaxy Y will auto reboot.
Video Guide 

Congratulation! you have successfully learned how to Flash Samsung Galaxy Y with Stock Firmware using ODIN.

(Visited 19 times, 1 visits today)

Related Post

Leave a Reply

Your email address will not be published. Required fields are marked *